SUCKER ROD PRESSURE CONTROL EQUIPMENT
COILED TUBING QUAD BOP & COMBI BOP
FEATURES
This Quad BOP is designed primarily for use with coiled tubing operations. Modifications can be made for use in wireline operations. Contact the factory regarding the necessary modifications for any non-standard uses.
Quad BOP’s are available with internal or external hydraulics in bore sizes from 2-9/16″ to 6-3/8″ and working pressures from 5,000 PSI to 15,000 PSI for standard or sour service. Coiled tubing size ranges from 0.75” to 3.50”.
Blind Rams: Designed to seal the pressure from below with nothing between the rams.
Shear Rams: Designed to shear coiled tubing of max. dia. of 2.88” leaving a clean end for circulating fluids or easy fishing. It shears the coiled tubing and seals the well in one operation.
Slip Rams: Designed as two-way grippers and to support a string of coiled tubing or prevent the coiled tubing from stripping out due to well pressure. Specially designed slip inserts are available for coiled tubing.
Pipe Rams: Designed to centralize and seal around the coiled tubing.
Read More
Manual Locking Actuators: Each ram actuator is equipped with a manual locking handle. After the rams are hydraulically closed, they can be locked in closed position with the manual handle. Should the hydraulics fail, the rams can be manually closed. The hydraulic must be re-established and used to re-open the rams.
Ram Position Indicators: Designed to give positive indication of ram position.
Equalizing Valves: Designed to prevent seal damage when opening either the blind or pipe rams with differential pressure present.
Options:
- Single Combi BOP available in combination of: Shear – Seal or Pipe-slip
- Dual Combi BOP available in combination of: Shear – Seal or Pipe-slip
SIDE LOADING STRIPPER PACKER
FEATURES
The ACT coiled tubing Side Loading Stripper/Packer is designed for use with injectors built by various manufacturers. The significant single feature of the ACT Side Loading Stripper/Packer is that it offers field replacement of the interlock packer, non- extrusion ring, and bushings through the side door, below the injector and with tubing in the well.
Additional features:
The union sub and nut are field
The union nut can be ‘latched up’, while stabbing the union sub into the BOP
Optimum tubing column support with tubing sizes 00, 1.25,1.50, and 1.75 available.
A unique three point tie rod arrangement provides a significantly greater working space within the side loading door clearance opening for enhanced field replacement of the vital sealing components and
The piston “close” and “open” ports are NPT and both are located below the door clearance.
Key components are 17-4 PH stainless steel or alloy steel for optimum strength and corrosion Bushings are of aluminium bronze.
Below the door energizer piston arrangement does not move the critical upper tubing bushings. This unique arrangement provides continuous, non-changing tubing column support.
Convenient NPT gauge / injection
Read More
Interlock packer and non – extrusion ring are interchangeable with Various materials are available to suit specific well /service conditions.
Glass – filled teflon non – extrusion ring provide an optimum interlock packer support / reliability.
The four hydraulic control supply ports are of NPT which require no special.
A unique “breach lock” style lock flange provides reliable safety of door closure yet offers easy field
The piston is situated below the packer element. Having the piston in this position will decrease the amount of hydraulic pressure required to pack-off around the Coiled.
OPERATING PARAMETERS
- Assembly Working Pressure : 10,000 PSI
- Test Pressure…. : 15,000 PSI
- Hydraulic Operating Pressures
- Piston Close (Packing – off) : 5,000 PSI
Max Piston Open (Relaxing Packer) : 5,000 PSI - Max Door Close : 3,000 PSI Max
- Door Open : 3,000 PSI Max
TANDEM SIDE LOADING STRIPPER PACKER
FEATURES
The ACT Tandem Side Loading Stripper Packer is designed to be used in tandem with standard side loading stripper packer. It is installed below the side loading stripper packer with a quick union connection.
In normal operations, the upper stripper packer, which is mounted below the injector, will be the primary packer, with the lower tandem stripper packer in reserve. If the upper packer wears away, the second (tandem) packer can be put in to service, or the upper packer element can be replaced, and the operation can be continued. In a high pressure well, the two stripper packers can be operated simultaneously or individually by their separate hydraulic connections.
The additional feature of tandem stripper packer is a chemical injection system installed in the upper part of the packer, through which a wide variety of ant-corrosion chemicals or lubricating oils can be injected on to the outer surface of the coiled tubing.
Additional Features:
The union sub and nut are field
The union nut can be ‘latched up’, while stabbing the union sub into the BOP union.
A unique three point tie rod arrangement provides a significantly greater working space within the side loading door clearance opening for enhanced field replacement of the vital sealing components.
The piston “close” and “open” ports are NPT and both are located below the door clearance
Key components are 17-4 PH stainless steel or alloy steel for optimum strength and corrosion Bushings are of aluminium bronze.
Below the door energizer piston arrangement does not move the critical upper tubing bushings. This unique arrangement provides continuous, non-changing tubing column
Convenient NPT gauge / injection
Read More
Interlock packer and non – extrusion ring are interchangeable with competitors. Various materials are available to suit specific well /service
Glass – filled teflon non – extrusion ring provide an optimum interlock packer support /
The four hydraulic control supply ports are of NPT which require no special fittings.
A unique “breach lock” style lock flange provides reliable safety of door closure yet offers easy field
The piston is situated below the packer Having the piston in this position
will decrease the amount of hydraulic pressure required to pack-off around the Coiled tubing.
OPERATING PARAMETERS
Assembly Working Pressure : 10,000 PSI
Test Pressure : 15,000 PSI
SUCKER ROD BLOWOUT PREVENTERS
The ACT Sucker Rod Blowout Preventers are designed to give positive protection against blowouts when operating with sucker rods in well service work by providing a positive seal around the sucker rods.
They may be permanently installed between the tubing head and the pumping tee or between the tee and the stuffing box. The BOP can also be used to pack off a pumping well by sealing on the polished rod or on the sucker rods.
These BOP’s are available with a wide selection of ram sizes and in a variety of pressure ratings with the choice of flanged or threaded end connections (thread sizes range from 1-1/2″ NU to 7″ API casing). Manual and hydraulic options are available.
CONVENTIONAL COILED TUBING STRIPPER PACKER
ACT conventional coiled tubing stripper / packers are available to accommodate tubing sizes from 3/4″ through 2-3/8″.