BRIDGE PLUGS
The ACT Bridge Plug is a high-pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. Bridge plugs, It can be set on any GO or Baker-type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. The packing elements are contained by rocker action back-up rings that eliminate extrusion of the elements at high temperatures and pressures.
The ACT Model BKR Premium Bridge Plug is a high pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K- 1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. The packing elements are contained by rocker action back-up rings that eliminate extrusion of the elements at high temperatures and pressures. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal.
ACT MODEL A PREMIUM BRIDGE PLUG – WIRELINE SET / DRILLABLE
The ACT Model A Premium Bridge Plug is a high pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. It can be set on any GO or Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. The packing elements are contained by rocker action back-up rings that eliminate extrusion of the elements at high temperatures and pressures.A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal.
One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. Optional packing systems of Viton or Aflas are available on special order. Special application tools can be custom designed to fit your specific needs.
ACT MODEL A LITE BRIDGE PLUG – WIRELINE SET / DRILLABLE
The ACT Model A Lite Bridge Plug is a medium pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. It can be set on any GO or Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal. One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling.
The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. It is also good in horizontal applications because there are no back-up rings. Optional packing systems of Viton or Aflas are available on special order. Special application tools can be custom designed to fit your specific needs.
FEATURES:
- Drillable cast iron construction
- Uses Alpha Big Boy Setting
- Sleeves and Adapter Rods
- Wireline set on GO or
- Baker Wireline Pressure
- Setting Tool Hydraulic set on ACT Hydraulic Setting Tool
- Small OD’s for extra clearance in heavy viscous fluids
- One-piece slips set in premium grade casings including P-110 Multi
- Durometer packing system
Plug remains set until gas pressure equalizes during drill out For temporary or permanent service
MODEL BKR PREMIUM BRIDGE PLUG – WIRELINE SET / DRILLABLE
The ACT Model BKR Premium Bridge Plug is a high pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K- 1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. The packing elements are contained by rocker action back-up rings that eliminate extrusion of the elements at high temperatures and pressures. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal.
One piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. Optional packing systems of Viton or Aflas are available on special order. This plug will not vent gas pressure prior to plug moving unless provisions are made. Special application tools can be custom designed to fit your specific needs.
FEATURES:
- Drillable cast iron construction
- Uses Bolt, Elder or Baker K-1 Setting Sleeves
- Wireline set on Baker Type
- Wireline Pressure Setting
- Tool Hydraulic set on ACT Hydraulic Setting Tool
- Small OD’s for extra clearance in heavy viscous fluids
- One-piece slips set in premium grade casings including P-110 Rocker action back-up prevent rubber extrusion For temporary or permanent service
MODEL BKR LITE BRIDGE PLUG – WIRELINE SET / DRILLABLE
The ACT Model BKR Lite Bridge Plug is a medium pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K-1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal. One-piece slips keep the plug securely set in premium grade casings including P-110.
The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. It is also good in horizontal applications because there are no back-up rings. Optional packing systems of Viton or Aflas are available on special order. This plug will not vent gas pressure prior to plug moving unless provisions are made. Special application tools can be custom designed to fit your specific needs.
Drillable cast iron construction
Features:
- Uses Bolt, Elder or Baker
- K-1 Setting Sleeves
- Wireline set on Baker Type
- Wireline Pressure Setting
- Tool Hydraulic set on ACT
- Hydraulic Setting Tool
- Small OD’s for extra clearance in heavy viscous fluids
- One-piece slips set in premium grade casings including P-110
- Multi-Durometer packing system
For temporary or permanent service
FRAC PLUGS WIRELINE SET – STANDARD FRAC PLUG
The Standard Frac Plug provides an economical means of temporary zone isolation for fracturing or other treatments. The plug can be set on different types of wireline pressure setting tools.
The Standard Frac Plug is supplied with a shear ring to give an accurate and secure set. Also supplied is a ball that will seat on the top of Frac Plug during a fracturing operation. This plug sustains moderate pressures and temperatures.
FEATURES:
- Electric wireline set
- Drillable Cast iron construction
- One piece slips – hardened to depth of wicker only Sets in any grade casing including P-110 Bottom set with shear ring
- For temporary or permanent service
- Ratcheting lock ring holds setting force
- Small O.D.’s for speed and safety when running
FRAC PLUGS WIRELINE SET – BIG BORE FRAC PLUG
The Big Bore Frac Plug is designed for frac jobs in which a large hole through the plug is required. The plug is supplied with a shear ring to give an accurate and secure set. Also supplied is a ball that will seat on the top of Frac Plug during a fracturing operation. This plug sustains moderate pressures and temperatures.
FEATURES:
- Electric wireline set
- Drillable One piece slips – hardened to depth of wicker only Sets in any grade casing including P-110
- Top set with shear ring For temporary or permanent service
- Ratcheting lock ring holds setting force
MODEL PREMIUM & LITE HM BRIDGE PLUG – TUBING SET
The Model HM Bridge Plug is set using hydraulic power to set the top slips and then mechanical pull to complete the set. The Premium is for high pressure and temperature while the Lite sustains moderate temperature and pressure.
The need for a mechanical setting tool does not exist because the setting mechanism is built-in. A ball is placed in the tubing string plugging off the built-in equalizing ports. Pressure is then applied to set the top slip and then mechanical pull is applied to finish the set. Releasing the tubing string from the plug is done by simply turning to the right.
Full tubing I.D. is available after releasing from the plug allowing other equipment to extend through the end of the tubing string.
FEATURES:
- Drillable Cast iron construction One piece slip
Sets in any grade casing including P-110 - Metal back-up to prevent rubber extrusion For temporary or permanent service Ratcheting lock ring holds setting force
- Excellent for deviated wells